|
About Frazier Push Back Pallet Rack 866-328-5066
NationWide Shelving offers Frazier Push Back Pallet Rack Products for Industrial Storage. Frazier Rack Company is a leading manufacturer in the storage equipment industry, offering a full line of racks to meet the demands of an ever-changing warehouse environment. Frazier's high-strength structural rack provides the additional resistance to forklift abuse not available with traditional roll-formed posts.
Increased Density
Today's challenge in warehousing is to store an ever increasing number of pallets, with an ever increasing number of products in a fixed storage space. These two factors pull in opposite directions. Pushback storage increases the pallet count, while offering many more pick faces than traditional high density storage systems like drive-in.
How It Works
Each pushback lane is equipped with a pair of inclined rails and a series of nested carts (i.e., 4 carts in a 5 deep system). The first pallet is placed by the lift truck on the top cart. He loads the second pallet by pushing back the first load and placing it on the next exposed cart. Pallets three and four are loaded similarly. The last pallet is placed on the rails themselves. When removing product, the lift truck takes out the front pallet allowing the pallets on carts behind it to roll gently to the front of the rack. Watch Video
When Does Pushback Apply?
When the average number of pallets per product exceeds five, a pushback system is easily justified. The higher the number, the deeper the lane is feasible (usually 3 lanes per product minimum). These multiple lanes allow rotation to achieve first-in first-out (FIFO). Steadiflo pushback systems can be configured to attain up to 100% more pallets stored than standard pallet racking and equal or greater increases over poorly occupied drive-in or floor storage configurations.
|
PALLETS PER PRODUCT LANE DEPTH |
LANE DEPTH |
|
1 - 4 |
....................... |
STANDARD RACK |
5 - 8 |
....................... |
2 DEEP PUSHBACK |
9 -12 |
....................... |
2 - 3 DEEP PUSHBACK |
13 - 16 |
....................... |
3 - 4 DEEP PUSHBACK |
17 - 20 |
....................... |
4 - 5 DEEP PUSHBACK |
OVER 20 |
....................... |
5 - 6 DEEP PUSHBACK |
|
System Flexibility
Frazier Push Back Rack is available in 2,3,4,5 and 6 deep styles and can be arranged as back to back islands or stand alone bays. Number of levels high restricted only by lift truck reach. No special fork trucks are required. Pushback systems are fully operational in freezers, coolers and high temperature environments
Pushback Accessibility
As shown in this 4 deep example below these are 12 pick faces on the pushback system on the left on only 4 pick faces on the drive-in system. the results in higher occupancy and longer honey combing.
Features & Benefits of Frazier Push Back Rack
Combining the high density of Drive-In and the selectivity of single deep rack, Glide-In “Push-Back” storage is Frazier's patented system of enveloping wheeled carts that glide on sloping rails. When unloading a pallet, each subsequent pallet gravity feeds forward to the front for removal. Made from 100% structural steel, the Glide-In “Push-Back” system features carts that carry loads parallel to the floor. For productivity, selectivity, density, and economy, Glide-In “Push-Back” dominates the industry.
What Makes Frazier Push back Rack Superior:
- 100% Structural Steel - Highly resistant to abuse; Long life; Greater load bearing capacity.
- Patented, Standard Glide-In Carts - Level carts are welded with cross members that can support weak or damaged pallets; Carts envelope each other so that the cart is readily accessible at aisle face.
- Patented, Low-Profile Carts - Shaped carts use less steel; Denser storage possible; Can be used where height requirements are restrictive; More cost-effective; All-welded design; Designed as level carts so loads travel parallel to floor.
- Unique Wheel Design - Each cart has 4 tapered wheels for less friction; Each wheel has 16 ball bearings with dust covers; Wheels are lubricated to operate in wide range of temperatures.
- Track Design - One piece, hot rolled structural steel installed at low pitch; Safe, easy to control speeds.
- System Design - Can be used with economical standard pallet rack components for system flexibility and lower cost.
- Bolted Rack Connections - Rigidity, strength and proper alignment are easy to achieve with bolted uprights, shelf beams, tracks, and bracing.
Quality and Value
Frazier Push Back Pallet Rack is a leader in steel storage products, and that allows us to deliver a product with quality second to no other. Since Nationwide Shelving is a top shelving provider, we are able to keep our prices low, virtually beating any price for our products on the market today. |
|