- Superior box construction for greater strength and supporting power.
- Clip-Type assembly for fast, easy set-up.
- Additional steel surcharge may apply.
Boxer Shelving delivers more support for less cost than any other shelving in the industry. Features full welded box formation in front and back of shelf and shall have formed channels on both ends. Corners are fully lapped for extra strength. Available in 22 or 20 ga. shelves. Rugged and sturdy 14 ga. uprights allow for 1-1/2" shelf adjustment. Closed units feature 24 ga. back and end panels. Includes sway braces. Gray, baked-on enamel finish. FOB Shipping Point.
Plus Applicable Steel Surcharge
- For use with Galvanized Storage Racks.
- Excellent choice for any application.
Heavy duty G-40 galvanized coating on structural grade 33 steel provides 100x the wear resistance of painted racks. The min spangle finish reflects light to maximize the lighting in storage areas. Galvanized racks are an excellent solution for harsh environments and for food storage where food is not in direct contact with the racks. Patented weld free Scotch Rack design makes galvanizing an economical choice for any application. FOB Shipping Point.
Complete Galvanize Deck With Corrugate Steel Decking
Fireproof, durable corrugated galvanized steel panels fit in beam step recess for easy sliding storage.
|DURA-SHELF® PLASTIC BULK RACK SHELVING
- Snaps together in seconds - no tools required.
- Modular design permits hundreds of shelving configurations.
Made of heavy duty high impact plastic for long-wearing use. Impervious to oils, gas, acids, solvents and most chemicals. Open grid shelving is ideal for wet, corrosive and harsh environments. Reduces dirt and dust accumulation and increases air flow and light penetration. Add or subtract shelves to satisfy spacing needs. FOB Shipping Point.
Containment trays available, see Related Items tab below.
- Particle Board Decking - 3/4" thick.
Save time and money with this heavy duty bulk storage rack. Featuring a heavy duty upright that can be "knocked down" for easier shipment as well as having the advantage of component replacement in case of damage. FastRak™ is ideal for storing bulky and/or heavy items with the unique ability to store items directly on the floor because it does not require a shelf at the bottom. Priced as 2 shelf units complete with particle board decking. All units include our heavy duty 3" step beams. FastRak™ extra shelves sold separately. FOB Shipping Point.
- 5 Gauge Wire Mesh Decking.
- 2" x 4" Wire Mesh Openings.
Save time and money with this heavy duty bulk storage rack. Featuring a heavy duty upright that can be "knocked down" for easier shipment as well as having the advantage of component replacement in case of damage. FastRak™ is ideal for storing bulky and/or heavy items with the unique ability to store items directly on the floor because it does not require a shelf at the bottom. Priced as 2 shelf units complete with wire mesh board decking. All units include our heavy duty 3" step beams. FastRak™ extra shelves sold separately. FOB Shipping Point.
- Designed for heavier storage items.
- Common T-Posts between units.
An economical storage system that provides exceptional value and versatility. accommodating applications from light to heavy duty. Rivetwell shelving is easy to assemble and expandable as needs change. Shelf levels are adjustable on 1-1/2" centers. No cross bracing allows access from all sides. Common T-posts between adjacent units. Attractive #729 Parchment powder coat finish. Decking sold separately. FOB Shipping Point.
Single Rivet Shelving
Single rivet shelving units are built using double rivet beams at top and bottom levels giving units a rigid frame and singe rivet beams on intermediate levels maximizing vertical storage openings. FOB Shipping Point.
Double Rivet Shelving
Similar to single rivet shelving, double rivet shelving uses double rivet beams at all levels providing increased rigidity and includes center supports for maximum shelf capacity. FOB Shipping Point.
Starter Units consist of 4 standard angle posts, 4 left-to-right standard double rivet angle beams, 4 front-to-back standard double rivet angle beams, 2 left-to-right standard rivet beams per intermediate level and 2 front-to-back standard single rivet beams at 1 intermediate level only (30" and 36" deep units include 2 front-to-back single rivet beams at each intermediate levels).
Adder Units consist of 2 standard T-posts, 4 left-to-right standard double rivet angle beams, 2 front-to-back standard double rivet angle beams, 2 left-to-right standard single rivet beams per intermediate level and 1 front-to-back standard single rivet beam at 1 intermediate level only.
- Rugged construction features stand up to abuse in high-activity areas.
- Shelf clips fit quickly into post to lock shelves firmly in place without tools.
- Meets varying capacity requirements by assembling mixed or matched sections of the same depth and height.
Pre-engineered sections 36"W. x 84"H. and features lapped and welded shelf corners for additional strength and durability. Upright posts are roll formed "T" members that allow shelves to adjust on 1-1/2" centers. FOB Shipping Point.
Box "W" Shelves...found on 22 ga. Medium Duty and 20 ga. Heavy Duty shelving. 22 ga. features a full 600 lb. capacity per shelf and 20 ga. features a full 800 lb. capacity per shelf.
Shelf Capacities are based on evenly distributed loads.
Reinforced 12 gauge steel shelves have a 2,000 lb. capacity per shelf. 2" x 2" x 3/16" corner angles have footpads with anchor. 72" overall height with 3-1/2" bottom shelf underclearance. Ships set up and ready for immediate use. FOB Shipping Point.